BTB-27 Bottle
BTB-27 Bottle, 20 liter, with 4” tri-clamp opening. 4” TC endcap assembly has 1/4” stainless diptubes with 1/2” TC connection. Cap also has 1/2” straight tubing vent and heavy-duty clamp.

BTB-27 Bottle
BTB-27 Bottle has 1/2” TC dip and filltube connections with 1/4” stainless tubing bent at 90 degrees. Two straight 1/2” TC connections are inlets/outlets for stainless coil extending to bottom for heat or cold transfer. Bottle also has shoulder fittings for sightglass and light, and 1” TC fitting at the bottom for drainage.

BTB-27 Bottle
BTB-27 Bottle has cap-assembly with 1/2” stainless tubing with 1/2” tri-clamp connections for vent, dip and filltubes. Diptube has 90 degree bend for a convenient connection and a 30 degree bend at the lower end.

BTB-21 Bottle
BTB-21 Bottle has fully-machined 4” endcap with three 3/4” TC fittings which can be sealed when not in use making for easier cleaning. 1/2” dip and filltubes clamp onto the machined-cap fittings.

BTB-21 Bottle
BTB-21 Bottle shown here with sanitary handles for easy lifting. 4” TC cap-assembly has 3/4” stainless tubing at 90 degree bends with 3/4” TC connections.

BTB-27 Bottle
BTB-27 Bottle has TC fittings welded onto bottle’s shoulders for use with 1/2” TC dip and filltubes which slide through and are then clamped onto shoulder fittings.

BTB-27 Bottle
BTB-27 Bottle, 10 liter, with sanitary solid bar handles. Cap-assembly has 1/2” stainless tubing at 90 degree bends with 3/4” TC connections. 2” TC fitting shoulder-welds allow for sightglass on one shoulder and removable light on other.

BTB-12 Bottle
BTB-12 Bottle has 4” cap-assembly with two 1.5” TC fittings welded at 30 degrees for sightglass and detachable tank illuminating device. Cap-assembly also has two 1/2” TC fittings welded straight for dip and filltube.