KTT-CTL Containers

Slant Bottom with Lock-Lever Ring type closure

The KTT series of slant bottom containers allows the contents to drain completely. The open top facilitates total cleanability, yet provides an air tight seal when the lid is used with a lock-lever ring and gasket.

  • 316L stainless steel container and lid
  • Seamless sanitary interior and exterior with radiused bottom corner
  • 304 stainless steel hollow side handles
  • Air/water tight seal with lock-lever ring and platinum-cured silicone gasket
  • 10 Ra finish standard

Options

  • KM Series dollies available for size KTT-CTL-30 through KTT-CTL-565H container
  • Passivation
  • Electropolished finish (10 Ra or better)
  • Gaskets - EPDM, Viton®
Model Volume H1 H2 H3 H4 I.D. Thickness (t) Tri-Clamp Weight
US gal L in mm in mm in mm in mm in mm in mm in lb kg
KTT-CTL-30 5.3 20.0 12.6 320.0 3.0 75.0 0.8 20.0 15.6 395.0 11.81 300.0 0.039 1.0 1.5 12.1 5.5
KTT-CTL-36 9.2 35.0 15.0 380.0 3.0 75.0 0.8 20.0 17.9 455.0 14.17 360.0 0.039 1.0 1.5 15.5 7.0
KTT-CTL-43 17.2 65.0 18.9 480.0 3.2 80.0 0.8 20.0 22.1 560.0 16.93 430.0 0.039 1.0 1.5 22.7 10.3
KTT-CTL-47 19.8 75.0 19.7 500.0 3.4 85.0 0.8 20.0 23.0 585.0 18.50 470.0 0.047 1.2 1.5 30.6 13.9
KTT-CTL-47H 26.4 100.0 24.4 620.0 3.4 85.0 0.8 20.0 27.8 705.0 18.50 470.0 0.047 1.2 1.5 34.8 15.8
KTT-CTL-565 37.0 140.0 25.6 650.0 3.5 90.0 1.2 30.0 29.1 740.0 22.24 565.0 0.047 1.2 2.0 40.1 18.2
KTT-CTL565H 52.8 200.0 36.6 930.0 3.5 90.0 1.2 30.0 40.2 1020.0 22.24 565.0 0.047 1.2 2.0 51.1 23.2

Larger custom sizes available upon request.