KTT-CTH Series Containers

Slant Bottom with Clip Down type closure

The KTT series of slant bottom containers allows the contents to drain completely. The open top facilitates total cleanability, yet provides an air tight seal when the lid is clamped down over a gasket.

  • 316L stainless steel container and lid
  • Seamless sanitary interior and exterior with radiused bottom corner
  • 304 stainless clips and hollow side handles
  • Air/water-tight seal with platinum-cured silicone gasket (Gasket with Class VI Certification available as a special-order item for the KTT-CTH-24 through KTT-CTH-47H)
  • 10 Ra finish standard
Options
  • KM Series dollies available for size KTT-CTH-30 through KTT-CTH-565H container
  • Passivation
  • Electropolished finish (10 Ra or better)
  • Gaskets – EPDM, Viton®
  • Custom Modifications Available

Not to be used with pressure or vacuum.

stainless-steel-containers
Filters Sort results
Reset Apply
Model #
Vol. Nominal
ID
Height
Thickness
Weight
Tri-Clamp
Data Sheet
2.64 US Gal / 10.0 L
9.45 in / 240 mm
13.2 in/335.3mm
.039 in / 1.0 mm
10.8 lb / 4.9 kg
1.5 in
5.3 US Gal / 20.0 L
11.81 in / 300 mm
15.6 in / 395.0 mm
.039 in / 1.0 mm
12.1 lb / 5.5 kg
1.5 in
9.2 US Gal / 35.0 L
14.17 in / 360 mm
17.9 in / 455.0 mm
.039 in / 1.0 mm
15.5 lb / 7.0 kg
1.5 in
17.2 US Gal / 65.0 L
16.93 in / 430 mm
22.1 in / 560.0 mm
.039 in / 1.0 mm
22.7 lb / 10.3 kg
1.5 in
19.8 US Gal / 75.0 L
18.50 in / 470 mm
23.0 in / 585.0 mm
.047 in / 1.2 mm
30.6 lb / 13.9 kg
1.5 in
26.4 US Gal / 100.0 L
18.50 in / 470 mm
27.8 in / 705.0 mm
.047 in / 1.2 mm
34.8 lb / 15.8 kg
1.5 in
37.0 US Gal / 140.0 L
22.24 in / 565 mm
29.1 in / 740.0 mm
.047 in / 1.2 mm
40.1 lb / 18.2 kg
2.0 in
52.8 US Gal / 200.0 L
22.24 in / 565 mm
40.2 in / 1020.0 mm
.047 in / 1.2 mm
51.1 lb / 23.2 kg
2.0 in

Larger custom sizes available upon request.